30″, 36″, or 52″ Rip Capacity

Motor Option(s) (60Hz TEFC): 1.75 or 3 HP available
Overall saw dimensions:

– 30 in: 61 3/4″ W x 31 1/8″ D x 34″ H

– 36 in: 69 1/8″ W x 33″ D x 34″ H

– 52 in: 85 1/4″ W x 33″ D x 34″ H

Motor Configuration:

– PCS175: 1.75 HP, 120v, 14 A (user config. to 220v w/ optional kit available for purchase).

– PCS31230: 3 HP, 1 phase, 230v, 13 A, Plug: NEMA 6-15P w/9’ cord

Saw body footprint: 19 3/8″ W x 19 3/8″ D (Cabinet Only)

Cast iron table: 20″ W x 27″ D
Extension wings: 12″ W x 27″ D each
Cast iron table (w/ extension wings): 44″ W x 27″ D
Extension table:

– 30 in: 12″ W x 27″ D

– 36 in: 23 ¾” W x 27” D

– 52 in: 40 1/8″ W x 27″ D

Shipping weights:

– 30 in fence systems: 430 lbs / 455 lbs (2 Boxes)

– 36 in fence systems: 505 lbs / (4 Boxes)

– 52 in fence systems: 528 lbs (4 Boxes)

Dimensions (saw body only): 42”W x 31”D x 30”H
Shipping weight (approx.):(table saw only) 375 lbs
Assembled weights – 1.75HP / 3HP

– 30″ Fence: 367 lbs / 380 lbs

– 36″ Fence: 408 lbs / 426 lbs

– 52″ Fence: 431 lbs / 449 lbs

Weight – table saw only: 317 lbs
Blade: 40-tooth, prof. grade, 5/8″ arbor
Blade diameter: 10″
Blade tilt: Left
Blade kerf: 0.118″ (3mm)
Blade plate thickness: 0.078″ (2mm)
Max. depth of cut, blade at 0º: 3 1/8″
Max. depth of cut, blade at 45º: 2 1/4″
Max. rip, right of blade: 30″, 36″, or 52″ (depending on selected rails)
Max. rip, left of blade: 12″
Dado diameter: 8″ (requires dado brake cartridge & insert)
Dado max. width: 29/32”
Arbor diameter at blade: 5/8″
Main bearing size: 62mm OD x 30mm ID
Second bearing size: 52mm OD x 25mm ID
Table in front of blade (max. elevation): 10 1/4″
Table behind blade (max. elevation): 7 1/2″
Arbor Runout: 0.001″ Maximum allowable runout
Table flatness measured diagonally: 0.010″ Maximum gap
Blade alignment with miter slot: 0.010″ Maximum displacement
Deviation of miter gauge indexing stops from actual: ±0.25º
Alignment between splitter and blade: 0.010″ Maximum difference
Miter slots T-shaped: 3/4″ at top, 1″ at bottom, 3/8″ deep
Miter slots center: 11 1/8″ center-to-center
Miter slots info: 5 1/2″ (arbor flange to center of right slot)
Dust collection port diameter: 4″
Riving knife / splitter thickness: 0.090″ (2.3 mm)
Dust collection blade guard (optional on 1.75 HP saws): polycarbonate, extends 1-3/16″ right of blade
Blade guard: (dust collection) port diameter 1-1/2″ Outside, 1-1/4″ Inside
Insert: zero clearance, phenolic core, melamine surfaces
Micro blade guard (standard on 1.75 HP saws): polycarbonate, extends 1″ right of blade
Hand wheels: 7″ diameter, cast iron w/ chrome handle
Belts: 2 V-ribbed belts – arbor b. static dissipative