HL-SOLIDCOM M1-4B – Overview

With major technical breakthrough, Hollyland is proud to present you a whole new series of full-duplex wireless intercoms – Solidcom. As the first member of this series, the Solidcom M1with 4 beltpacks is a go-to choice for micro-mid events with a capacity from 100 to 1000 guests, including church events, electronic field productions, exhibitions, concerts, etc.

Industry-First Solution to Power up to a 1300 Foot Radius Communication RangeFor the first time in the industry, an integrated panel antenna is inserted into the base station. Besides, Solidcom M1 is also equipped with a pair of external FRP antennas. Combining these 2 antenna options, Solidcom M1 significantly improves on-site work efficiency and flexibility, and prolongs transmission range to a great extent.

Enhanced Audio QualityAdopting self-developed Noise-Cancellation Algorithms and a super-wide frequency response, Solidcom M1 delivers authentic and premium sound at broadcast-level sampling rate.

Enhanced Operating ExperienceAn integrated panel antenna is embedded in the base station for effortless setup. Featuring minimalist button design, the beltpack provides you intuitive operating experience. In addition, settings and grouping of the whole set can be adjusted easily via base station, APP or web.

Intuitive Grouping At A Single TapSetting up groups with Solidcom M1 is an intuitive experience. It’s as easy as selecting the numbers of specific beltpacks and making them a group. Either through the base station, Hollyland APP or webpage, a group can be created and managed in seconds.

Multi-Device Cascade Connection For Hassle-Free Group CommunicationFitted with 4 different interfaces 2W (XLR connector), 4W (RJ45), POE/LAN power supply, and cascading interfaces), the base station can be cascaded to multiple sets of different audio equipment only by connecting with a standard network cable or an XLR cable.

Out-Of-The-Box ConvenienceThe beltpacks are paired by factory default and are good to use out of the box. In the event of cross-area collaboration where changing or adding beltpacks is needed, users only need to connect the beltpacks to the base station via USB to Type-C cables to pair and group the beltpacks.

A Plethora Of Choices For Your EarsSolidcom M1 comes standard with professional LEMO headphones whose microphones can be switched on by putting down the microphone boom or vice versa. The headphone is also featured with the Sidetone function which allows the user to hear his own voice even with the headphone on and then adjusting speaking volume in time.

PLEASE NOTE!The SOLIDCOM M1 System is compatible with the following:
Clear-Com Wired/Wireless Intercom System
Datavideo Intercom System
Hanson Wired Intercom System
Altair Wireless Intercom System

• Features:

  • Carrier-grade voice quality, up to 450 meters line-of-sight usage distance
  • 1.9GHz frequency, support frequency configuration in different regions
  • Automatically switching between external omnidirectional fiberglass Antenna and built-in panel antenna
  • Full-duplex wireless communicating
  • The Station supports up to eight beltpacks to talk at the same time. Station, App and Webserver configuration upgrade supported.
  • Beltpack supports simultaneous calls in three groups
  • The Station supports cascading or connecting with the 2/4 wire audio systems
  • Station’s power could be supplied by POE cascading or NP-F type batteries
  • Built-in lithium battery for the beltpacks. Usage for over 6 hours
  • Portable storage charging base, easy to carry
  • 10 level volume. Different needs of scenes satisfied.

• Specifications:

  • Station
  • Interfaces:
    – POE interface (RJ45)
    – Power supply interface (RJ45)
    – 4 wire audio interface
    – USB interface
    – 2 wire audio interface
  • Power Supply: POE power suppy, NP-F type batter
  • Frequest Response: 200Hz – 7kHz
  • Signal-to-Noise Ratio: >50dB
  • Distortion: <1%
  • Use Ranger: 450 meters line-of-sight usage
  • Frequency Band: 19Ghz
  • Modulation Mode: GFSK
  • Transmit Power: Max. 21dBm
  • Receiving Sensitivty: <-93dBm
  • Power Consumption: < 3W
  • Dimensions: 10″ x 7.1″ x 1.9″
  • Weight: 3.4lbs
    Beltpack
  • Interfaces:
    – 3.5mm headset
    – LEMO headset
    – USB Type-C
  • Power Supply: 1500mAh lithium polymer battery
  • Frequency Response: 200Hz – 7kHz
  • Signal-to-Noise Ratio: >50dB
  • Distortion: <1%
  • Use Range: 450 meters line-of-sight usage
  • Frequency Band: 19GHz
  • Modulation Mode: GFSK
  • Transmit Power: Max. 21dBm
  • Receiving Sensitivty: <-93dBm
  • Power Consumption: < 0.6W
  • Dimensions: 4.1″ x 2.55″ x 0.88″
  • Weight: 0.44lbs

• Item Includes:

  • 1xStation
  • 4xBeltpack
  • 1xCharging Base
  • 2xHigh Gain Omnidirectional Antenna
  • 4xLEMO Single-Ear Headset
  • 1xRJ45 to XLR Cable (5 meters)
  • 1xUSB-Type-A to Type-C Cable
  • 1xPOE Adapter
  • 1x4-Pin XLR Adapter
  • 8xBeltpack Battery
  • 1x3/8 Installation Accessory
  • 1xUser Guide

• GTIN:

  0191460002045